压力淬火过程中锗的相结构研究

 应用高压原位差热方法，直接测量了压力下锗的固化参数─—固化温度与过冷度。高压差热信号表明，当压力大于3 GPa时，锗在凝固过程中可能发生结构相变。X射线结构分析表明，在最终的样品中除GeⅠ相外，还形成GeⅢ相和GeⅣ相。     

Surface grating formation and erasing on a-Se films

Surface relief formation at holographic recording on amorphous selenium films was demonstrated and investigated. The presence of this optical phase modulation component is essential for ensuring significant, stable and erasable optical recording in a-Se films at 290–320 K temperatures, where conventional photodarkening was known as insignificant and unstable. Photocrystallization can only be observed in super-exposed a-Se films at the given experimental conditions of hologram recording. Erasing behavior of surface relief gratings under heat treatment was also investigated in order to reveal further details of the mechanism. Photoinduced structural transformations within the amorphous phase, connected to local ordering under the condition of light-induced fluidity, are proposed as an explanation for the relief formation and erasing. The observed reversible optical recording process may be useful for the various optoelectronic applications of photoconductive a-Se layers. Received: 12 June 2000 / Accepted: 6 June 2001 / Published online: 30 August 2001     

TCH-600氧、氮、氢分析仪在唐钢的应用

通过TCH-600氧、氮、氢分析仪在唐钢的实际应用,重点介绍了助熔剂、坩埚、样品熔解及空白和校正过程中应注意的问题,钢铁样品分析条件的选择.     

Optimization of the surface texture for silicon carbide sliding in water

Surface texturing has been recognized as an effective means to improve the tribological performances of sliding surfaces. Usually, generation additional hydrodynamic pressure to increase the load carrying capacity is regarded as the most significant effect of surface texture. In the case of silicon carbide sliding against identical material in water, the experimental results indicate that surface texture is also helpful to improve the running-in progress to smooth the contact surfaces, showing another reason to result in low friction. Based on the consideration of enhancing the generation of hydrodynamic pressure and improving running-in progress, a surface texture pattern, which was combined with large (circle, 350 μm in diameter) and small (rectangular, 40 μm in length) dimples, was designed to maximize the texture effect on the load carrying capacity of SiC surfaces sliding in water. The friction coefficient of such textured surface was evaluated and compared with that of untextured and those only with large or small dimples only. The friction reduction mechanisms of the patterns with different dimples in size are discussed.     

Dielectric and optical properties of polymer-liquid crystal composite

Dielectric properties of polymer-liquid crystal mixture, having constituent polymer, poly-butyl methacrylate (PBMA) and liquid crystal, cholesteryl nonanoate, are reported as a function of frequency and temperature. The measurement has been done in a temperature range of 300-375 K and frequency range of 100 Hz-10 MHz. The dielectric permittivity and dielectric loss shows significant changes with the addition of polymer molecules in liquid crystal. The significant feature of composite formation is that the pure liquid crystal and polymer do not show dielectric relaxation in the frequency range covered, while the composite shows relaxation peak at a particular frequency. The optical transmittance of pure liquid crystal and composite has also been measured and compared.     

Isotopic families of contact manifolds for elliptic PDE

A test for a function to be a solution of an elliptic PDE is given in terms of extensions, as solutions, from the boundaries inside the domains belonging to an isotopic family. It generalizes a result of Ehrenpreis for spheres moved along a straight line.

     

Study of asymmetric charge writing on Pb(Zr,Ti)O3 thin films by Kelvin probe force microscopy

Polycrystalline Pb(Zr_0.55Ti_0.45)O₃ thin film was deposited on Pt/Ti/SiO₂/Si(1 0 0) by radio-frequency-magnetron sputtering method, and the writing of charge bits on the surface of PZT thin film was studied by Kelvin probe force microscopy. It is found that the surface potential of the negative charge bits are higher than those of the corresponding positive ones. When ferroelectric polarization switching occurs, the potential difference becomes even more remarkable. A qualitative model was proposed to explain the origin of the asymmetric charge writing. It is demonstrated that the internal field in the interface layer, which is near the ferroelectric/electrode interface in ferroelectric film, is likely to be the cause for the occurrence of this phenomenon.     

EXISTENCE OF PERIODIC SOLUTIONS OF SYSTEM OF DIFFERENCE EQUATIONS

This paper studies the nonautonomous nonlinear system of difference equationsΔx(n)=A(n)x(n)+f(n,x(n)),n∈Z,(*) where x(n)∈R~N,A(n)=(a_(ij)(n))N×N is an N×N matrix,with a-(ij)∈C(R,R) for i,j= 1,2,3,...,N,and f=(f_1,f_2,...,f_N)~T∈C(R×R~N,R~N),satisfying A(t+ω)=A(t),f(t+ω,z)=f(t,z) for any t∈R,(t,z)∈R×R~N andωis a positive integer.Sufficient conditions for the existence ofω-periodic solutions to equations (*) are obtained.